 Standard
High Float
Emulsions
• HFE-90/HFRS-2 
MSDS
High Float Emulsion used for chip seal. Pen range of 90 to 150. A
rapid set type of emulsion.
• HFE-150/HFMS-2
MSDS
Emulsion used for Cold recycle and for some cold mix
applications. Pen range of 150 to 300.
High Float Polymer Emulsions
• HFE-901S/HFRS-P1
MSDS
High Float polymer emulsion that has 1% polymer. A rapid set type of
emulsion. This product used for chip seal when your condition warrants
something more than the standard HFE-90.
• HFE-901S-50%DIL
MSDS
Fog Seal material. May require cover material depending on the
surface and application rate.
• HFE-100S/HFRS-P2
MSDS
STYRELF Polymer High Float Emulsion used for chip seal. Rapid
setting emulsion, sticks the chips very fast, can be used on high volume
roads. Fog Seal material. May require cover material depending on the
surface and application rate.
• HFE-300S/HFMS-2SP
MSDS
High Performance oil used primarily for cold mix surface and pot hole
repair along with other cold and warm applications. Pen range 300+.
• RSLTP
MSDS
Rapid set emulsion for chip sealing in 40-70 degree temperatures and
heavily shaded areas.
For more information on any Albina Asphalt product please contact
us.
Full Service Makes the Difference!
|
